F 150 2WD Lightning V8-5.4L SOHC SC VIN 3 (2001)
5. Install the parking brake strut.
1
Install the parking brake link spring and the parking brake spring retainer on the parking brake strut.
2
Install the parking brake strut.
3
Install the brake shoe anchor pin guide plate.
6. Install the short brake shoe retracting spring.
1
Place the brake shoe adjusting lever cable over the anchor pin, with crimped side in.
2
Install the short brake shoe retracting spring.
7. NOTE: Make sure the brake shoe adjusting lever cable is positioned in the cable guide groove.
Install the long brake shoe retracting spring.
1
Install the cable guide.
2
Position the brake shoe adjusting lever cable in the cable guide groove.
3
Install the long brake shoe retracting spring.
8. NOTE: To prevent incorrect installation, the socket end of each brake adjuster screw is stamped R or L.
Assemble the brake adjuster screw assembly.