F 150 2WD Lightning V8-5.4L SOHC SC VIN 3 (2001)
1
Apply Silicone Brake Caliper Grease and Dielectric Compound D7AZ-19A331-A (Motorcraft WA-10) or an equivalent silicone compound
meeting Ford specification ESE-MlC171-A.
2
Install the brake adjuster screw into the brake shoe adjusting screw nut to the end of the threads, and then loosen one-half turn.
3
Install the brake shoe adjusting screw socket on the brake shoe adjusting screw nut.
9. Install the brake adjuster screw assembly.
1
Position the brake adjuster screw assembly.
2
Install the brake shoe adjusting screw spring.
3
Position the brake shoe adjusting lever cable.
4
Position the adjusting lever return spring and the brake shoe adjusting lever.
5
Hook the brake shoe adjusting lever cable to the brake shoe adjusting lever.
10. Test the operation of the automatic self-adjuster.
1
Pull the brake shoe adjusting lever cable and check that the brake shoe adjusting lever rotates the brake shoe adjuster assembly.
2
Release the brake shoe adjusting lever cable and check that the brake shoe adjusting lever advances to the next notch on the brake shoe
adjusting screw nut.
11. Adjust the brakes.
12. Install the brake drum.
