F 150 2WD Lightning V8-5.4L SOHC SC VIN 3 (2001)
^
Have an assistant pump the brake pedal and then hold firm pressure on the brake pedal.
^
Loosen the caliper bleeder screw until a stream of brake fluid comes out. While the assistant maintains pressure on the brake pedal, tighten the
caliper bleeder screw.
^
Repeat until clear, bubble-free fluid comes out.
^
Refill the brake master cylinder reservoir as necessary.
^
When finished, tighten the caliper bleeder screw to 21 Nm (15 lb-ft).
^
Check and top off brake master cylinder reservoir as necessary.
9.
Inspect the brake hose and caliper for leaks.
10.
Position the left front wheel and tire assembly onto the vehicle and install the lug nuts. Tighten the lug nuts to 203 Nm (150 lb-ft), in a star pattern.
