F 150 2WD Lightning V8-5.4L SOHC SC VIN 3 (2001)
3. Install a new gasket and install the supercharger and plenum assembly, bolts, and the stud bolts.
^
Stage 1: Tighten to 2 Nm (18 Lb-In).
^
Stage 2: Tighten 45 Nm (33 Lb-Ft).
NOTE: Tighten the retainers in two stages, in the sequence shown.
4. Install the two upper vacuum hoses to the supercharger bypass valve actuator.
5. Install the EGR vacuum regulator bracket and install the nuts.
^
Position the bracket and install the nuts.
