F 150 2WD Lightning V8-5.4L SOHC SC VIN 3 (2001)
10. Disconnect the RH radio interference capacitor.
11. Lift the engine control wiring harness off of the valve cover studs.
12. CAUTION: Do not use metal scrapers, wire brushes, power abrasive discs or other abrasive means to clean the sealing surfaces. These tools
cause scratches and gouges which make leak paths. Use a plastic scraping tool to remove all traces of old sealant.
NOTE: The bolts are part of the valve cover and cannot be removed.
NOTE: Windsor engine shown; Romeo engine similar.
Loosen the bolts and remove the valve cover.
^
Remove the valve cover gasket. Clean and inspect the mating surface.
Installation
