F 150 2WD Lightning V8-5.4L SOHC SC VIN 3 (2001)
9. Remove the Crankshaft Holding Tool.
10. Install the crankshaft sprocket, make sure the flange faces forward.
11. Position the lower end of the (inner) timing chain on the crankshaft sprocket, aligning the timing mark on the outer flange of the crankshaft
sprocket with the single copper (marked) link on the chain.
12. NOTE: Make sure the upper half of the timing chain is below the tensioner arm dowel.
NOTE: If necessary, use the Camshaft Positioning Tool to adjust the camshaft sprocket slightly to obtain timing mark alignment.
Position the timing chain on the camshaft sprocket with the camshaft sprocket timing mark positioned between the two copper (marked) chain
links.
add image
13. CAUTION: The camshaft sprocket can jump if the Camshaft Aligner is not secured.
NOTE: Be sure the copper (marked) chain link and crankshaft sprocket timing mark are aligned.
NOTE: The lower half of the timing chain must be positioned above the dowel.
Position the RH (outer) timing chain on the crankshaft sprocket.ocket.