F 150 2WD Lightning V8-5.4L SOHC SC VIN 3 (2001)
Heater Hose: Service and Repair
Heater Hose Assembly
REMOVAL
1. Drain the cooling system.
2. Disconnect the heater outlet hose at the engine.
3. Disconnect the heater inlet hose at the engine.
1
Loosen the hose clamp.
2
Disconnect the heater inlet hose.
4. Compress the holding tabs and disconnect the heater water hoses at the heater core.
INSTALLATION
1. To install, reverse the removal procedure.
^
Lubricate the coolant hoses with MERPOL(R) meeting Ford specification ESE-M99B144-B or plain water only, if needed.
