ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Acronyms and Definitions|Page 4165 > < Engine - High Idle/Sticking Throttle|Page 4162
Page 1
background image

Positive Crankcase Ventilation: Description and Operation
Acronyms and Definitions

2V - L

ACRONYMS AND DEFINITIONS

NOTE:  This Acronyms and Definitions listing contains technical terms applicable to Ford Motor Company products. It is not intended to be an
all-inclusive dictionary of components and their functions. If a detailed description of a particular system or component is desired, refer to the applicable
Vehicle System for the specific vehicle being serviced.

2V:  Two Valve engine configuration.

4V:  Four Valve engine configuration.

ABS:  Anti-lock Brake System.

A/C:  Air Conditioning. A vehicle accessory system that modifies the passenger compartment air by cooling and dehydrating the air.

ACC:  Air Conditioning Clutch. Indicates status of the A/C clutch.

ACCS:  Air Conditioning Cycling Switch. Indicates status of the A/C cycling switch.

ACD:  Air Conditioning Demand. A signal input to the PCM from the Air Conditioning control panel.

ACP:  Air Conditioning Head Pressure or A/C cycling switch input state.

ACPSW:  Air Conditioning Pressure Switch.

ACPV:  Air Conditioning Head Pressure Volts. A voltage input to the Powertrain Control Module (PCM) from the ACP switch or sensor.

ACR:  Air Conditioning Relay. Commanded output controlled by the PCM and acts as an A/C cutout control during heavy acceleration.

A/D:  Analog-to-Digital. Analog-to-Digital signal conversion.

ADC:  See ATDC.

AFCM:  Alternative Fuel Control Module.

AIR:  Secondary Air Injection.

AIRB:  Secondary Air Injection Bypass.

Air Diverter:  Air Diverter Valve. Part of the EAIR system. Diverts fresh air to the exhaust system when the electric air pump is commanded on.

AIR EVAL:  Air System Evaluated. Displays a YES or NO status indicating whether the Air System has been evaluated for OBD (On-Board
Diagnostic) II purposes.

Air/Fuel Ratio:  Air to fuel mixture ratio. An air/fuel mixture that is 14.7:1 is also called stoichiometry.

AIRM:  Secondary AIR pump monitor.

Ambient Air Temperature:  Temperature of the air surrounding an object.

Analog (Electrical/Electronic):  An electrical signal that can obtain any value within the voltage limits of the signal.

ARB:  Air Resource Board.

ARPMIDES:  Ancillary RPM Desired. RPM required to maintain the vehicle speed commanded by Speed Control Command Switch (SCCS) inputs.

ASCII:  American Standard Code for Information Interchange.

ATDC:  After Top Dead Center. The location of the piston after it has reached the top of its stroke. Measured in degrees of crankshaft rotation.

AVOM:  Analog Volt-Ohm Multimeter. Readings are indicated by a sweep hand on a printed scale, rather than a digital display.

Acronyms and Definitions|Page 4165 > < Engine - High Idle/Sticking Throttle|Page 4162