F 150 2WD Lightning V8-5.4L SOHC SC VIN 3 (2001)
Fuel Injector Wiring Harness: Service and Repair
REMOVAL
WARNING: DO NOT SMOKE OR CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR
ANY FUEL RELATED COMPONENTS. HIGHLY FLAMMABLE MIXTURES ARE ALWAYS PRESENT AND MAY IGNITE. FAILURE
TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
1. Disconnect the fuel lines.
2. Remove the wiring splash shield.
3. Remove the bolts and position the bracket aside.
4. Disconnect the connectors.
^
Loosen the bolt and disconnect the 42-pin connector.
^
Disconnect the 16-pin connector.