F 150 2WD Lightning V8-5.4L SOHC SC VIN 3 (2001)
Heated Oxygen Sensor: Service and Repair
Front LH Heated Oxygen Sensor
Socket, Exhaust Gas Oxygen Sensor
SPECIAL TOOL(S)
REMOVAL
1. Raise and support the vehicle.
2. Remove the Heated Oxygen Sensor (HO2S).
1
Disconnect the electrical connector.
2
Using the special tool, remove the sensor.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: Apply a light coat of High Temperature Nickel Anti-Seize Compound F6AZ-9L494-AA or equivalent meeting Ford specification
ESE-M12A4-A to the threads of the HO2S.
