ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Bag Disarming and Arming|Page 7422 > < Air Bag Disarming and Arming|Page 7420
Page 17
background image

7. Disconnect the passenger air bag module electrical connector.

8. Attach the restraint system diagnostic tool to the vehicle harness side of the passenger air bag electrical connector.
9. Connect the battery ground cable.

10. With the restraint system diagnostic tools installed at all deployable devices, prove out the supplemental restraint system (SRS).
11. Disconnect the battery ground cable and wait at least one minute.

REACTIVATION

WARNING:  TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, CAUTIONS, AND
NOTES AT THE BEGINNING OF THE DEACTIVATION PROCEDURE.

1. Disconnect the battery ground cable and wait at least one minute.

2. Remove the restraint system diagnostic tool from the vehicle harness side of the passenger air bag electrical connector.

Air Bag Disarming and Arming|Page 7422 > < Air Bag Disarming and Arming|Page 7420