ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Technician Safety Information|Page 7525 > < Technician Safety Information|Page 7523
Page 9
background image

14. Install the tilt wheel handle and shank.
15. Install the steering wheel. Do not install the driver air bag module at this time.

16. Attach the restraint system diagnostic tool to the clockspring electrical connector at the top of the steering column.

NOTE:  F150 shown, Lightning similar.

17. Connect the battery ground cable.
18. With the restraint system diagnostic tools installed at all deployable devices, prove out the supplemental restraint system (SRS).
19. Disconnect the battery ground cable and wait at least one minute.

20. Remove the restraint system diagnostic tool from the clockspring electrical connector at the top of the steering column.

NOTE:  F150 shown, Lightning similar.

21. Connect and position the driver air bag module to the steering wheel.

Technician Safety Information|Page 7525 > < Technician Safety Information|Page 7523