F 150 2WD Lightning V8-5.4L SOHC SC VIN 3 (2001)
Seat Belt: Service and Repair
60/40 Split and Front Bench Seat , Center Passenger
Torx Bit Tool Set Used For T55 "Torx Plus" Bit
SPECIAL TOOL(S)
REMOVAL
1. Move the front passenger seat forward.
2. Using the special tool 501-D012 (D83L-2100-A), remove the bolts.
^
Feed the belt up through the seat cushion strap and remove the front passenger safety belt tongue assembly.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: Make sure the tongue webbing is outside the seat side shield, not under the shield. The webbing could be cut if it is routed under the seat
side shield.
2. Check the active restraint system for correct operation.
