F 150 2WD Lightning V8-5.4L SOHC SC VIN 3 (2001)
1. To install, reverse the removal procedure.
^
Route the rear center safety belt and tongue through the safety belt retaining strap on the rear seat back.
^
See the removal procedure or Specifications for torque specifications.
NOTE:
^
The double safety belt buckle assembly or safety belt and buckle assembly must be installed on top of the rear seat riser.
^
Make sure that the belt webbing is not twisted prior to installation.
^
Make sure to tighten bolts to specification.
2. Check the restraints system for correct operation.
