F 150 2WD Lightning V8-5.4L SOHC SC VIN 3 (2001)
Mass Air Flow Sensor: Service and Repair
REMOVAL
1. Loosen the air inlet tube clamps.
2. Disconnect the three vacuum lines and remove the air inlet tube.
^
PCV closeout
^
IAB hose
^
Supercharger vacuum actuator vacuum line
3. Remove the Mass Air Flow (MAF) sensor.
1
Disconnect the electrical connector.
2
Remove the four screws.
3
Remove the MAF sensor.
INSTALLATION
1. To install, reverse the removal procedure.
