F 150 2WD Lightning V8-5.4L SOHC SC VIN 3 (2001)
Power Steering Pump: Technical Service Bulletins
Steering - Correct Placement of P/S Pump Bolt/Washer
Article No.
00-22-2
10/30/00
^
STEERING - POWER STEERING PUMP BOLT - CORRECT PLACEMENT OF BOLTS AND WASHER - WINDSOR BUILT ENGINES
ONLY
^
ENGINE - POWER STEERING PUMP BOLT - CORRECT PLACEMENT OF BOLTS AND WASHER - WINDSOR BUILT ENGINES ONLY
FORD:
2000 MUSTANG
2001 ECONOLINE, EXPEDITION, F-150, F-250, SUPER DUTY F SERIES
LINCOLN:
2001 NAVIGATOR
This article applies only to Mustang 4.6L 2V engines built 8/1/2000 through 9/30/2000 and E-Series, F-Series, Expedition, and Navigator 4.6L/5.4L 2V
and 4V engines built 8/1/2000 through 10/31/2000. This applies only to Windsor built engines.
ISSUE
One of the three fasteners used to secure the power steering pump to the 4.6L Mustang engine and the 5.4L truck engine manufactured at Windsor
Engine Plant has been fitted with a flat washer under the head of the bolt. This is to accommodate a slight variation in the depth of the hole that is tapped
to receive the bolt.
ACTION
When servicing an engine fitted with this washer, ensure the washer is re-used on the bolt and corresponding bolt hole that it was originally taken from in
the block (not the front cover). This is to ensure proper power steering pump-to-block torque.
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES: 303000, 499000
