F 150 2WD Lightning V8-5.4L SOHC SC VIN 3 (2001)
7. Remove the bearing and gear.
^
Thoroughly clean all drill shavings from the steering column and inspect it for damage.
8. To install, reverse the removal procedure.
^
Install a new ignition switch lock cylinder.
^
Verify ignition switch lock cylinder operation. Electronic ignition key may need re-programming. See: Accessories and Optional Equipment
9. WARNING: To avoid the risk of serious personal injury, read and follow all warnings, notes and instructions in the reactivation
procedure.
Reactivate the supplemental restraint system (SRS).