F 150 2WD Lightning V8-5.4L SOHC SC VIN 3 (2001)
6. Install the high lift transmission jack with the special tool to the transmission.
7. CAUTION: Be sure not to raise the back of the transmission too high. If it makes contact with the underbody damage to the TSS and OSS sensors
will occur.
Remove the rear transmission mount.
1. Raise the transmission up off the rear crossmember support.
2. Remove the bolts.
3. Remove the rear transmission mount.
8. Remove the transmission extension housing.
9. Remove and discard the extension housing gasket.
Installation
All applications
1. CAUTION: The extension must have a shoulder or a boss cast in it to hold the orifice lube plug in the back of the case. If the wrong extension
housing is used the plug may become loose and/or fall out and cause transmission damage.
NOTE: Lightly lubricate the gasket with petroleum jelly to hold it in place during assembly.
Install the new extension housing gasket.
1. Verify that the extension has a shoulder cast in it.
2. Install the new extension housing gasket.