ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Fluid Line/Hose, A/T|Tubes|Page 4861 > < Fluid Line/Hose, A/T|Tubes|Page 4859
Page 5
background image

Install the fluid cooler tube(s). 

4R100 with auxiliary fluid cooler

4. NOTE: If the CBV assembly was removed, refer to Cooler Bypass Valve for the installation procedure. 

Install the fluid cooler tube(s). 

Vehicles with 4R100 transmission

5. 2L CAUTION: Install a new inline transmission fluid filter (XC3Z-7B155-BA) every 48,000 km (30,000 miles). and always as part of a

transmission overhaul or exchange. If the vehicle was not equipped with an inline fluid filter, install a new inline transmission fluid filter kit
(XC3Z-7B155-AA) according to the instructions supplied with the kit as part of a transmission overhaul or exchange. 

CAUTION: Failure to follow the instructions supplied with the inline transmission fluid filter kit can cause transmission damage. 

CAUTION: Verify that the flow arrow on the filter points toward the transmission. 

Install a new inline, transmission fluid filter (XC3Z-7B1557BA). If the vehicle was not equipped with an inline fluid filter install a new inline
transmission fluid filter kit (XC3Z-7B155-AA) according to the instructions supplied with the kit. Carry out the transmission fluid cooler flow test
procedure to verify that there is correct fluid flow through the new inline fluid filter.  

All vehicles

Fluid Line/Hose, A/T|Tubes|Page 4861 > < Fluid Line/Hose, A/T|Tubes|Page 4859