F 150 2WD Lightning V8-5.4L SOHC SC VIN 3 (2001)
6. NOTE: The two rubber-coated sealing washers can fall out when removing the cooler line ease fitting.
Remove, and discard the front cooler line case fitting and the two rubber-coated sealing washers.
7. NOTE: The two rubber-coated sealing washers can fall out when removing the cooler line case fitting.
Remove, and discard the rear cooler line case fitting and the two rubber-coated sealing washers.
8. Remove the cooler bypass valve (CBV) assembly from the transmission.
Installation
1. CAUTION: Failure to correctly install the new rubber-coated sealing washers will result in transmission fluid leaks.
Install the new rubber-coated sealing washers and the new cooler line case fittings.
1. Install one rubber-coated sealing washer on each cooler line case fitting.
2. Install both cooler line case fittings into the CBV assembly fittings.
3. Install one rubber-coated sealing washer on each cooler line case fitting.
