ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Transmission Mode Indicator - A/T > < Auxiliary|Page 5026
Page 4
background image

Install a new inline transmission fluid filter (XC3Z-7B155-BA). If the vehicle was not equipped with an inline fluid filter install a new inline
transmission fluid filter kit (XC3Z-7B155-AA) according to the instructions supplied with the kit. Carry out the transmission fluid cooler flow test
procedure to verify that there is correct fluid flow through the new inline fluid filter.  

5. Lower the vehicle. 

6. CAUTION: Do not use any fluid approved for MERCON V application. Using a fluid rated for MERCON V may cause internal damage in

MERCON only applications. 

Fill the transmission with the specified type and quantity of transmission fluid.  
-

Use Motorcraft MERCON V Multi-Purpose (ATF) Transmission Fluid XT-5-QM or equivalent meeting MERCON V specifications. 

7. Check for leaks. 
8. If equipped with air suspension, reactivate the system by turning on the air suspension switch. 

Transmission Mode Indicator - A/T > < Auxiliary|Page 5026