F 150 2WD Lightning V8-5.4L SOHC SC VIN 3 (2001)
Differential Axle Housing: Service and Repair
Ford 10.25 Inch Rear Axle
Axle Housing
Removal and Installation
1. Remove the brake lines from all retaining clips on the axle housing.
2. Remove the axle shafts.
^
Do-not disconnect the brake lines from the brake calipers/drum backing plates.
^
Position the brake calipers/drum backing plates aside.
3. Remove the parking brake cables.
^
Remove the parking brake cables from all retaining clips on the axle housing.
4. Disconnect the rear brake anti-lock sensor electrical connector.
5. Mark the driveshaft flange and the rear axle pinion flange for correct alignment during the installation.
