F 150 2WD Lightning V8-5.4L SOHC SC VIN 3 (2001)
Using the special tools, inspect ring gear backlash and ring gear back face runout.
5. CAUTION: Mark the position of the bearing caps, as arrows may not be visible. The bearing caps must be installed in their identical locations and
positions.
Loosen the differential case.
1. Remove the bearing cap bolts.
2. Remove the bearing caps.
6. To simplify the installation, fabricate two differential case retaining straps from metal stock as shown.
7. WARNING: Be careful not to allow the differential case to fall.
CAUTION: Place a wood block between the pry bar and the rear axle housing to protect the machined surface from damage.
Using the pry bar and the wood block, remove the differential case from the rear axle housing.
8. Remove the ring gear bolts.
