F 150 2WD Lightning V8-5.4L SOHC SC VIN 3 (2001)
1. Prelubricate each steel clutch plate and soak all friction plates with additive friction modifier for at least 15 minutes.
2. NOTE: Do not mix the differential clutch packs or shims from one side with the other.
NOTE: The Belleville spring is a dished plate.
Assemble the differential clutch packs (without the shims and Belleville springs) on the respective differential side gears.
3. Clamp the special tool in a vise. Install the differential clutch pack and the differential side gear (without the shim or the Belleville spring) on the
gauge.
4. Position the special tool on top of the differential clutch pack.
