F 150 2WD Lightning V8-5.4L SOHC SC VIN 3 (2001)
2. Slide the small opening end of the slip-yoke boot on the driveshaft stub shaft, as far as it will travel.
3. Using the special tool, crimp the driveshaft slip-yoke boot clamp.
4. Install the driveshaft slip-yoke on the driveshaft.
1. Pull the slip-yoke boot toward the driveshaft. Lubricate the driveshaft splines with approximately 10 grams (0.24 oz.) of lubricant.
^
Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B.
2. Position the new large slip-yoke boot clamp.
3. Align the blind splines, and install the driveshaft slip-yoke on the driveshaft.
