F 150 2WD Lightning V8-5.4L SOHC SC VIN 3 (2001)
2. Install the driveshaft center yoke and new bearing cups.
1. Start a new bearing cup in the driveshaft center yoke.
^
Check the needle bearings for correct positioning.
2. Position the driveshaft center yoke on the spider.
3. Position the assembly in the special tool.
4. Press the bearing cup to just below the snap ring groove.
^
Repeat to install the new bearing cup on the opposite side of the driveshaft center yoke.
3. Install four new snap rings.
4. Install a new centering cup spring.
5. Install a new spider and bearing cups.
1. Start a new bearing cup in the driveshaft centering socket yoke.
^
Check the needle bearings for correct positioning.
2. Position the new spider in the driveshaft centering socket yoke.
