F 150 2WD Lightning V8-5.4L SOHC SC VIN 3 (2001)
3. Position the driveshaft centering socket yoke in the special tool.
4. Press the bearing cup to just below the snap ring groove.
^
Repeat to install the new bearing cup on the opposite side of the driveshaft centering socket yoke.
6. Install the driveshaft centering socket yoke and new bearing cups.
1. Start a new bearing cup in the driveshaft center yoke.
2. Position the spider in the driveshaft center yoke.
3. Position the assembly in the special tool.
4. Press the bearing cup to just below the snap ring groove.
^
Repeat to install the new bearing cup on the opposite side of the driveshaft center yoke.
7. Install the remaining new snap rings.
8. CAUTION: Do not strike the bearings.
Check the U-joints for freedom of movement.
^
If bearings are binding, strike the yoke with a plastic hammer.
