F 150 2WD Lightning V8-5.4L SOHC SC VIN 3 (2001)
16. Remove the speedometer drive gear.
1. Remove the speedometer gear retaining ring.
2. Remove the speedometer drive gear.
Installation
1. Install the speedometer drive gear.
1. Install the speedometer drive gear.
2. Install the speedometer gear retaining ring.
2. NOTE: Extension housing must be installed within four minutes after applying silicone.
Apply a small bead of silicone rubber to the surface of the extension housing.
^
Use Silicone Rubber D6A7--19562-AA or equivalent meeting Ford specification ESB-M4G92-A.
3. Install the extension housing.
1. Position the extension housing.
2. Install the bolts.