F 150 2WD Lightning V8-5.4L SOHC SC VIN 3 (2001)
4. Remove the coat hooks.
1
Remove the two screws.
2
Remove the two coat hooks.
5. Remove the dome lamp.
1
Carefully pry the lens out of the dome lamp.
2
Remove the dome lamp screws.
3
Remove the dome lamp.
6. Lower the back half of the roof trim panel.
7. Cut the foam butyl from around the back window glass.
8. Remove the back window glass.
1
Remove the 12 nuts.
2
Remove the back window glass.
9. Remove any remaining foam butyl from the window glass frame.
INSTALLATION
1. Clean the back window glass with an alcohol-free cleaner.
2. Apply 8 mm foam butyl, or equivalent meeting Ford specification WSB-M2G234-C to the back window glass.
^
Start at the bottom middle and work around.
3. Install the back window glass.
1
Position the back window glass.
2
Install the 12 nuts.
