F 150 2WD Pickup V6-4.2L VIN 2 (1997)
^
1996 Econoline Club Wagon XLT, RV and Chateau built through 2/11/96 - Figure 6
MAINTENANCE
All vehicles require some amount of maintenance. The same is true for bright metal finish chrome bumpers. These components must be cleaned and
polished to keep their bright appearance. The front and top surface of the bumper is chrome plated and the back of the bumper is sprayed with a rust
deterrent compound. If the compound is thin or scraped off, the bumper back may rust. The compound may be removed by the clamping force of the
bumper attaching bolts. This may result in oxidation that could bleed around to the front of the bumper when wet and possibly stain the bumper. Periodic
maintenance to remove rust is required.
Ford Motor Company recommends the use of Ford Bright Metal Cleaner and Polish to maintain the appearance of these bumpers. There are other
products that may also be used to maintain the bumper's finish that may or may not have been tested by Ford Motor Company.
PART NUMBER
PART NAME
F65Z-17757-AA
Front Bumper
F3TZ-17757-AB
Front Bumper
F65Z-17757-CA
Front Bumper
F5TZ-17757-C
Front Bumper
F2TZ-17757-A
Front Bumper
F2UZ-17757-B
Front Bumper
388442-S309
Rivet
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION
DESCRIPTION
TIME
961716A
Replace Front Bumper -
1.0 Hr.
1997 F-150 4X4
961716B
Replace Front Bumper -
0.9 Hr.
1997 F-150 4X2
961716C
Replace Front Bumper -
1.1 Hr.
1996 F-150, Bronco XLT,
And Eddie Bauer Editions
With Air Deflectors
961716D
Replace Front Bumper -
0.7 Hr.
1996 F-250-350 XLT,