ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Rear Disc|Page 8695 > < Parking Brake Cable|Specifications
Page 1
background image

Parking Brake Cable: Service and Repair
Rear Disc

Parking Brake Rear Cable And Conduit

REMOVAL:

Parking Brake Control Tension Relief

-

Relieve the tension on the parking brake system.

    

NOTE: Make sure the parking brake control is fully released.

    

1

Pull the front parking brake cable and conduit.

2

Insert a suitable retainer.

-

Raise and support the vehicle.

 

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING,

JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE
AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN
UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE
VEHICLE DURING THESE OPERATIONS. 

Front Parking Brake Cable And Conduit Removal

-

Disconnect the front parking brake cable and conduit from the RH parking brake rear cable and conduit.
^

Pull the RH parking brake rear cable and conduit forward to unclip it from the front parking brake cable and conduit.

Rear Disc|Page 8695 > < Parking Brake Cable|Specifications