F 150 2WD Pickup V6-4.2L VIN 2 (1997)
3. Install the fan shroud.
a. Lower the fan shroud onto the radiator clips.
b. Install the two fan shroud screws.
4. Install the fan blade assembly and the fan clutch.
a. Position the fan blade assembly and the fan clutch on the water pump pulley.
b. Use Fan Clutch Holding Tool to hold the water pump pulley steady.
c. Use Fan Clutch Wrench to install the fan blade assembly and fan clutch.
NOTE: The fan clutch has LH threads.
5. Connect the radiator coolant recovery reservoir hose to the radiator.
a. Push the (A) radiator coolant recovery reservoir hose onto the (B) radiator fitting.
b. Position and tighten the hose clamp.
6. Connect the upper radiator hose to the radiator.
