F 150 2WD Pickup V6-4.2L VIN 2 (1997)
6. Remove the A/C clutch field coil.
1. Position Shaft Protector on the nose opening of the compressor.
2. Use (A) Differential Side Bearing Puller to remove the (B) field coil.
CAUTION: Do not use air tools.
INSTALLATION
1. Clean the A/C clutch field coil mounting surface head.
2. Use (A) Field Coil Replacer, (B) Coil Pressing Tool and (C) 2-Jaw Puller to install the (D) A/C clutch field coil.
NOTE: Check that the A/C clutch field coil outer diameter bottoms completely against the head. Ensure that the coil electrical connector is
correctly positioned.
3. Install the A/C compressor pulley bearing and the A/C pulley.
4. Install the pulley snap ring with the bevel side out.