F 150 2WD Pickup V6-4.2L VIN 2 (1997)
key in the ignition switch. Inputs may be tested in any order. As an input is toggled ON or OFF, the door ajar indicator (if the ignition switch is in the
RUN position) and tone outputs will be activated for one second for confirmation. At any time, if the key is removed from the ignition switch, the DTC
Output mode will be re-entered.
Note that all CTM functions remain disabled while in diagnostic test mode. The charts show all the possible inputs that can be tested for the CTM
controlled interior lighting system.
NOTE: Several of the inputs will not operate unless the ignition is in the RUN position.
