F 150 2WD Pickup V6-4.2L VIN 2 (1997)
Supercab Models
Refer to Figure 1, when performing the following inspection.
1.
Open all doors.
2.
On right side front seat belt, flip out sling arm cover at headliner. Make sure anchor bolt (A) is present. Pull on anchor side of seat belt (not
retractor side). Belt should not pull out of anchor (B).
3.
On right side rear seat belt, flip out D-ring cover. Make sure anchor bolt (C) is present. Fold down right side rear seat cushion. Pull on seat belt
anchor (D) bracket. Bracket must stay in place.
4.
On left side rear seat belt, flip out D-ring cover. Make sure anchor bolt (G) is present. Fold down left side rear seat cushion. Pull on seat belt
