F 150 2WD Pickup V6-4.2L VIN 2 (1997)
Regular Cab Models
Refer to Figure 2, when performing the following inspection.
1.
Open both doors.
2.
On right side seat belt, flip out D-ring cover. Make sure stud nut (Q) is present. Visually inspect anchor side of seat belt (not retractor side) for
anchor bolt (R).
3.
On left side seat belt, flip out D-ring cover. Make sure stud nut (T) is present. Visually inspect anchor side of seat belt (not retractor side) for
anchor bolt (S).
