F 150 2WD Pickup V6-4.2L VIN 2 (1997)
Remove the driver seat safety belt buckle.
NOTE: To ease removal, position the driver seat in its most rearward position and the passenger seat in its most forward position.
1
Disconnect the safety belt warning indicator switch electrical connector.
2
Use Safety Belt Bolt Bit T77L-2100-A to remove the bolt.
3
Remove the driver seat safety belt buckle.
INSTALLATION
To install, reverse the removal procedure. Check for proper operation.
Center and RH Passenger
REMOVAL
Remove the front center and RH passenger safety belt buckle end.
1
Use T55 "Torx" Bit (part of D83L-2100-A) to remove the buckle bolt.
2
Feed the buckle up through the top of the seat cushion and remove the front seat safety belt buckle.
INSTALLATION
To install, reverse the removal procedure. Check for proper operation.
