F 150 2WD Pickup V6-4.2L VIN 2 (1997)
1. Position (A) Direct Clutch Lip Seal Protector T80L-77234-A over the clutch cylinder hub and install the (B) inner piston seal.
-
Install the seal with sealing lip facing down.
NOTE: Lubricate direct clutch piston inner seal and seal protector with petroleum jelly.
2. Install the clutch piston outer seal so that when the piston is installed the sealing lip points toward the bottom of the cylinder.
3. Use (A) Direct Clutch Lip Seal Protector T80L-77254-A to install the (B) direct clutch piston.
NOTE: Coat inner and outer direct clutch piston seals, clutch cylinder sealing area and piston inner sealing area with petroleum jelly.
4. Install the piston return spring and retainer assembly.
5. Use (A) Clutch Spring Compressor T65L-775 1 5-A to compress the piston return spring and install the (B) retaining ring.
