F 150 2WD Pickup V6-4.2L VIN 2 (1997)
2. Install a new centering cup spring.
3. Install four new snap rings.
4. Install a new bearing cup into the driveshaft centering socket yoke.
(1) Start a new bearing cup into the driveshaft centering socket yoke.
(2) Position the new spider in the driveshaft centering socket yoke.
(3) Position the driveshaft centering socket yoke in U-Joint Tool.
(4) Press the bearing cup below the driveshaft centering socket yoke surface.
5. Install a new bearing cup into the driveshaft yoke.
(1) Start a new bearing cup into the driveshaft yoke.
(2) Position the new spider in the driveshaft yoke.
(3) Position the driveshaft in U-Joint Tool.
(4) Press the bearing cup below the yoke surface.
