F 150 2WD Pickup V8-351 5.8L Lightning (1993)
1.
Replace the right side radius arm bracket fasteners.
NOTE:
THE SPECIFIED FASTENERS AND TORQUE REQUIREMENTS MUST BE USED. SEE FIGURE 1 FOR A DESCRIPTION OF PARTS
CONTAINED IN THE RIGHT SIDE RADIUS ARM BRACKET KIT (E8TZ-3L095-A). REPLACE ONE (1) RIVET AT A TIME TO MAINTAIN
BRACKET LOCATION.
a.
Start with rivet # 1 (Figure 1). Drill an 1/8" (3.175 mm) hole through the middle of the rivet.
b.
Drill the same hole with an 11/32" (8.731 mm) drill.
c.
Use an air chisel to remove the rivet head.
d.
Drive the rivet out with a punch.
e.
Line ream the # 1 rivet (Figure 1) hole in the frame web to a 1/2" (12.7 mm) diameter.