F 150 2WD Pickup V8-4.6L (2002)
4. Remove the two screws securing the lumbar adjustor control to the seat track riser.
^
Push lumbar adjuster control inward to provide clearance for trim panel removal.
5. Remove the side trim cover.
6. Disconnect the heated seat switch electrical connector. Press the locking tabs, remove the switch from the trim panel.
INSTALLATION
1. Install the heated seat switch into the trim panel and connect the heated seat switch electrical connector.
^
Verify the switch locking tabs are securely seated.
2. Position the side trim cover and install the three trim cover screws.
^
The bolt shaft must be inserted into the cover standoff.
