F 150 2WD Pickup V8-4.6L (2002)
Air Door Actuator / Motor: Service and Repair
Vacuum Control Motor
Panel/Defrost Door
REMOVAL
1. Remove the panel/defrost door vacuum control motor.
1
Disconnect the vacuum line.
2
Remove the push nut.
3
Remove the screws.
4
Remove the panel/defrost door vacuum control motor.
INSTALLATION
1. To install, reverse the removal procedure.
Air Inlet Door
REMOVAL
1. Remove the plenum chamber.
2. Remove the air inlet door vacuum control motor.
1
Disconnect the vacuum line.
2
Remove the screws.
3
Remove the air inlet door vacuum control motor.
^
Rotate the vacuum control motor to disconnect the vacuum control motor rod from air inlet door lever.
INSTALLATION
1. To install, reverse the removal procedure.
Panel/Floor Door
REMOVAL
1. Remove the floor duct.