F 150 2WD Pickup V8-4.6L (2002)
1.
Replace the Compuvalve 2L3Z-9F954-AE. Refer to Section 303-04D in Workshop Manual.
2.
Replace HVAC blower harness 3L3Z-18B574-AA (Figure 1).
a.
Remove connector from blower motor behind dash, right hand side of vehicle.
b.
Unplug the two connectors and remove short (8 inch) harness containing the blower connector.
c.
Install blower connector to blower motor.
d.
Reconnect remaining two connectors.
Parts Block
OTHER APPLICABLE ARTICLES: NONE
SUPERSEDES:02-21-5
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES: 203000, 203200, 207000
Disclaimer