F 150 2WD Pickup V8-4.6L (2002)
Accelerator Pedal: Service and Repair
Adjustable Accelerator Pedal
REMOVAL
1. Depress the locking tabs on the accelerator pedal drive cable and remove the drive cable from the accelerator pedal assembly.
NOTE: Make sure that the adjustable pedals assembly is at the full forward position (pedals positioned toward front of the vehicle). The
accelerator pedal and shaft can be serviced separately from the adjustable pedal assembly. However, the accelerator pedal and shaft itself is only
serviced as an assembly.
2. Disconnect the accelerator cable from the accelerator pedal and shaft assembly.
3. Remove the bolts and remove the accelerator pedal and shaft assembly.
INSTALLATION
