F 150 2WD Pickup V8-4.6L (2002)
Accelerator Pedal: Service and Repair
Pedal and Bracket - Adjustable
Pedal and Bracket - Adjustable
Removal
1. CAUTION: The brake pedal and the accelerator pedal must be in the same position when install a new cable or a new pedal. The pedals must be
in the all the way forward or all the way rearward position.
Disconnect the battery ground cable.
2. Remove the instrument panel opening cover.
3. Remove the nuts and the steering column support bracket.
4. Remove the stoplight switch hairpin clip.
5. Slide the stoplight switch, booster push rod and the bushing off the brake pedal pin.