F 150 2WD Pickup V8-4.6L (2002)
9. Remove the inboard, outboard and front tower cap screw covers. Remove four tower cap attachment screws.
NOTE:
^
The inboard and outboard tower cap covers are not interchangeable.
^
Inspect the tower cap covers for damage. If the tower cap covers are damaged, install new tower cap covers.
10. Remove the screws and the bracket.
NOTE: Observe the retainer bracket orientation.
11. Remove the outer and front safety belt web guides.
1
Using a pin-type retainer removal tool, release the two pin-type retainers for the web guide.
2
Remove the front safety belt web guide.
3
Remove the upper safety belt web guide.
