ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Front Safety Belt Retractor - SIR, Supercab|Page 8031 > < Front Safety Belt Retractor - SIR, Supercab|Page 8029
Page 9
background image

13. Connect the seat control switch electrical connector.

All seats

14. Restore the vehicle to operating condition.

1

Install the seat on the side with the affected safety belt retractor.

WARNING:  TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS,
CAUTIONS, NOTES, AND INSTRUCTIONS IN THE SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
DEACTIVATION/REACTIVATION PROCEDURE.
  Refer to: Air Bag(s) Arming and Disarming.

2

Reactivate the supplemental restraint system (SRS).

WARNING:  TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, NOTES,
AND INSTRUCTIONS IN THE SEAT REMOVAL AND INSTALLATION PROCEDURE.

3

With all the restraint system diagnostic tools removed, prove out the supplemental restraint system (SRS).  See: Air Bag(s) Arming and
Disarming/Service and Repair/Prove Out Procedure

WARNING:  THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE
FROM THE VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE
VIOLATION OF VEHICLE SAFETY STANDARDS.

4

Check the active restraint system for correct operation.

Front Safety Belt Retractor - SIR, Supercab|Page 8031 > < Front Safety Belt Retractor - SIR, Supercab|Page 8029