F 150 2WD Pickup V8-4.6L (2002)
7. CAUTION: Discard outer manual control lever shaft nut. Do not reuse. The old nut will not retain torque specification.
Remove the manual control lever.
1
Remove the outer manual control lever shaft nut.
2
Remove the manual control lever.
8. Remove the digital transmission range TR sensor.
1
Remove the two bolts.
2
Remove the digital TR sensor.
9. Remove the manual control valve detent lever spring.
1
Remove the bolt.
2
Remove the manual control valve detent lever spring.
10. NOTE: Use a shop cloth to protect the transmission case surface.
Remove the manual lever shaft retaining pin.
