F 150 2WD Pickup V8-4.6L (2002)
7. WARNING: Be careful not to allow the differential case to fall.
CAUTION: Place a wood block between the pry bar and the rear axle housing to protect the machined surface from damage.
Using the pry bar and the wood block, remove the differential case from the rear axle housing.
8. Remove the ring gear bolts.
9. CAUTION: Care should be taken not to damage the ring bolt hole threads.
NOTE: The anti-lock speed sensor ring cannot be reused once removed.
Insert a punch in the bolt holes. Drive off the ring gear and, if necessary, the anti-lock speed sensor ring.
10. Install the differential case.
1
Position the differential case assembly, including bearing clips and shims, in the carrier.
2
Install the differential bearing caps.
3
Install the differential bearing cap bolts.