F 150 2WD Pickup V8-4.6L (2002)
2. Tighten the special tool to seat the pinion bearing cups into their bores.
Using 205-DO55 and 205-153
3. Using the special tools, drive the outer pinion bearing cup into the axle housing.
4. Using the special tools, drive the inner pinion bearing cup into the axle housing.
Setting pinion depth
5. CAUTION: Whenever the cups am replaced, the differential pinion bearings must also be replaced. Make sure the cups are correctly seated in
their bores. If a feeler gauge of the specification shown in the illustration can be inserted between a cup and the bottom of its bore at any point
around the cup, the cup is not correctly seated.
